Search

Replacement Receiver Setup (Hopper)

Follow these instructions if you need to set up your new replacement receiver.

  1. Unpack Receiver

Unpack contents of box.  Do not dispose of the box and protective packaging, as you will need to use these to return your old receiver.  

  1. Swap Replacement Receiver with Old Receiver

Disconnect all cables from your old receiver and securely connect them to the same locations on your replacement receiver. Refer to the enclosed packout instructions to guide you through this process.

  1. Check Wiring - Receiver to Wall

Check that the wiring between your DISH receiver and your wall is correct using the packout instructions included with the replacement receiver or the diagram below:


Ensure that all connections are secured and hand tightened.

  1. Check Wiring - Receiver to TV

Check that the wiring between your DISH receiver and your TV is configured properly using the packout instructions or the appropriate diagram that matches the type of connection cable you use:


Ensure that all connections are secured and hand tightened.

  1. Check for Install Wizard

Follow the Install Wizard instructions on your screen once your receiver is powered on.

  1. Verify Hopper Functionality

Press "View Live TV" on your Hopper remote and verify that video is present.

  1. Verify Joey Functionality

Press "View Live TV" on your Joey remote and verify that video is present.

Follow
X

Get our newsletter!

It seems that you have already subscribed to this list. Click here to update your profile.